Impianti osmosi inversa
Osmosi inversa RO 100 GPD Hobby
Numero di catalogo: | 150003 |
---|---|
EAN (rosso) : | 8594197901995 |
Dimensioni: | 250 x 300 x 120 |
Peso: | 4.00 kg |
Garanzia (mesi) : | 24 |
- Descrizione
- Video
- Richiesta prodotto
Descrizione
Osmosi inversa RO 100 GPD Hobby
Reverse osmosis 100 GPD Hobby
Complete reverse osmosis with 75 GPD membrane 100 GPD (385 l/24 h). This reverse osmosis is equipped with an in-line mechanical prefilter.
In-line sludge prefilter made of polypropylene foam removing rust, sand, mud from 10 microns upwards
Exchange according to the pollution of the incoming water to the RO approx. after 3-6 months
10 "x 2.0" sedimentation in-line filter with 1/4 "threads with fittings
Maximum flow 1,9 liter / min
Shelf life 3-6 months, 3-6 thousand liters
In-line pre-filter with activated carbon
In-line activated carbon filter. Removes 99% chlorine and 96% lead. In-line, granular filling
Activated carbon is made from high quality activated carbon from coconut shells. Removes
organic matter and chlorine from water before entering the reverse osmosis membrane. 10 "x 2.0" carbon in-line
filter equipped with 1/4 "threads with fittings. Maximum flow 1 liter / min. Service life 3 - 6 months, 10000 liters
(2,642 gal).
RO / DI (refillable) in-line filter, where the "mixbed" PUROLITE of the highest quality is used, anex mixture
and cation exchange resin serve as a purification stage for the output of reverse osmosis - when required to achieve ultrapure
water. Production of 99.9% pure water. It is possible to achieve a conductivity of less than 0.1 uS / cm. Decisive additional
final treatment with higher contamination of the incoming water, eg phosphates, silicates, which may be included in tap water
with surface water treatment suitable especially for marine aquaristics, laboratories. When exhausted
replaces the cartridge.
Service life approx. 100-1600 liters (according to the degree of pollution).
We recommend regular measurement of the produced water.
Filling content: approx. 0.4 liters.
Max. temperature: 38 ° C
Max. flow: approx. 1.9 liters / min
Minimum temperature: 2 ° C
100 GPD membrane output in the Czech water supply network in 24 hours approx. 100 - 300 liters according to connection conditions.
All spare parts in stock.